Batten Ventilation Products
BattenVent
BattenVents are made of top quality, rigid, polyethylene plastic that are various sizes in thickness and width including the popular 2-3/8” wide X 3/8” thick X 37” long size for maximum on the job installation flexibility. BattenVents allow air to travel in all directions behind the surfaces through the built-in corrugated air channels that connect the air passages behind the siding or other building materials. This allows the walls or roof system to dry out the materials within, preventing moisture build-up inside the wall or roof system whether from leaks or condensation. BattenVents are rigid, non-compressive and easy to handle.
RafterVent
RafterVentis an under-plywood, top-of-rafter vent easily installed during the construction of an addition or a new home. The RafterVent provides adequate ventilation in the spaces to either side of the vent placement.
It is a required vent product when your soffit to ridge air flow is blocked by a skylight or dormer. RafterVent easily allows air movement in those trapped areas.
CedarVent
CedarVent and CedarVent Plus are made of polyethylene plastic that is 2.375” wide X 3/8” thick X 36” long for maximum on the job installation flexibility. CedarVent Plus (Fabric factory attached) and CedarVent (no fabric attached) allows air to travel in all directions through the built-in corrugated air channels and acts as a rain and condensate screen allowing moisture to drain and evaporate behind the cedar.